Coaster 460231 - Step-by-Step Assembly Instructions; Step 1: Lower Bed Frame Assembly; Step 2: Attach Bed Slats; Step 3: Assemble Guardrails and Trestle Bars

ITEM :
460231(B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
Insert wood dowels to both ends of bed rail without hole.
Align and fasten bed rails to lower bed end using long bolt
and barrel nut and tighten with Allen wrench
Align and fasten bed slats to bed rail using long wood
screw and tighten with screw driver ( not included).
STEP 3 STEP 4
3.1 Align and fasten flat trestle bar to bed rail with hole and
long guardrail by using short bolt and tighten with Allen
wrench.
3.2 Align and fasten short guardrails to square trestle bar
using barrel nut and long bolt and tighten with Allen wrench
3.3 Align and fasten square trestle bar to bed rail with hole
using short bolt and tighten with Allen wrench
3.4 Align and fasten flat trestle bar to short guardrail and
bed rail with hole using short bolt and tighten with Allen
wrench.
Insert wood dowel to both ends of bed rails with holes.
Align and fasten guardrails and bed rail with hole to
upper left and right bed end using long bolt and tighten
with Allen wrench.
www.coastercompany.com
PAGE 3 OF 6