Coaster 460231 - Further Assembly Steps; Step 5: Attach Upper Bed Slats; Step 6: Assemble Ladder; Step 7: Mount Upper Bed

ITEM :
460231 (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 5 STEP 6
Align and fasten bed slats to bed rail with hole by using long
wood screw and tighten with screw driver( not included).
Align and fasten ladder stiles to ladder step using Allen
cap screw and tighten with Allen wrench.
STEP 7 STEP 8
Insert metal pin to the top of lower bed ends, then align and
place the upper bed end onto the pin.
Align and fasten the ladder to bed rail using short wood
screw and tighten with screw driver( not included).
www.coastercompany.com
PAGE 4 OF 6