Coaster 460442 - User Manual

Need help?

Do you have a question about the Coaster 460442 and is the answer not in the manual?

Summary

Bunk Bed Assembly Instructions

Assembly Tips and Warnings

Provides guidance on preparation, safety warnings, and product usage guidelines.

Parts and Hardware Identification

Identifies all components and hardware required for bunk bed assembly.

Step-by-Step Assembly Guide

Detailed instructions for assembling the bunk bed, covering all stages from start to finish.

Mattress Size and Safety Information

Specifies mattress dimensions and provides crucial safety warnings for bunk bed use.

Critical Safety Warnings

Highlights essential warnings to prevent serious or fatal injury during bunk bed use.

This document is an assembly instruction manual for a Coaster Fine Furniture bunk bed, model number 460442 (B1-B4).

Function Description:

The Coaster Fine Furniture bunk bed, model 460442 (B1-B4), is designed to provide two sleeping surfaces in a stacked configuration, optimizing space in a room. It can also be configured as two separate floor-standing beds. The bunk bed includes a ladder for accessing the upper bunk and guardrails for safety. The design incorporates storage shelves at the head of the bed, offering convenient space for books or small items.

Important Technical Specifications:

Model Number: 460442 (B1-B4)
Product Type: Bunk Bed
Mattress Dimensions (Upper Bunk):
- Length: 74" - 75"
- Width: 37 1/2" - 38 1/2"
- Thickness: 6" Maximum
Mattress Dimensions (Lower Bunk):
- Length: 74" - 75"
- Width: 37 1/2" - 38 1/2"
- Thickness: 6" Maximum
Guardrail Requirement: Mattress surface must be at least 5 inches (127 mm) below the upper edge of guardrails.
Parts Breakdown: The bunk bed components are distributed across four boxes (B1, B2, B3, B4).
- B1 (Box 1): Contains the Right Upper Bed End (1PC) and Left Upper Bed End (1PC).
- B2 (Box 2): Contains the Right Lower Bed End (1PC) and Left Lower Bed End (1PC).
- B3 (Box 3): Contains the Upper Back Bed Rail (with 2 holes) (1PC), Upper Front Bed Rail (with 3 holes) (1PC), Lower Front Bed Rail (with 2 holes) (1PC), Lower Back Bed Rail (1PC), Long Guardrail (2PCS), Short Guardrail (2PCS), Right Ladder Stile (1PC), Left Ladder Stile (1PC), Ladder Step (4PCS), and Flat Trestle Bar (3PCS).
- B4 (Box 4): Contains Roll Slats (13PCS) (2 SETS).
Hardware Identification (Z-B3(BOX 3) - Hardware Pack):
- Long Bolt (1): 22 PCS
- Barrel Nut (2): 22 PCS
- Wood Dowel (3): 30 PCS
- Short Bolt (4): 12 PCS
- Allen Cap Screw (5): 8 PCS
- Wood Screw (6): 16 PCS
- Metal Dowel (7): 6 PCS
- Allen Wrench (8): 1 PC
- Medium Bolt (9): 6 PCS
Assembly Time: Approximately 30 minutes.
Tools Required: Phillips head screwdriver (not provided by manufacturer).

Usage Features:

Convertible Design: Can be used as a bunk bed or separated into two individual floor-standing beds.
Safety Features: Includes guardrails for the upper bunk and a ladder for access.
Integrated Storage: Features shelves at the head of the bed for convenience.
Age Restriction (Upper Bunk): Not suitable for children under 6 years of age.
Occupancy Limit (Upper Bunk): Prohibit more than one person on the upper bunk.
Ladder Use: The ladder MUST be securely attached to the upper bunk rail when used as a bunk bed. When used as two separate beds, the ladder MUST be stored in a separate location where children cannot use it. The ladder is solely for accessing the top unit.
Guardrail Placement: Always use guardrails on both long sides of the upper bunk. If placed against a wall, the full-length guardrail should be positioned against the wall to prevent entrapment.
Prohibited Activities: Do not allow horseplay, jumping on the bed, or attaching/hanging items (hooks, belts, jump ropes) to any part of the bunk bed not designed for such use.
Mattress Type: The use of water or sleep flotation mattresses is prohibited.
Night Light Recommendation: Use of a night light may provide added safety for a child using the upper bunk.

Maintenance Features:

Regular Checks: Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all connectors are tight.
Replacement Parts: Replacement parts, including additional guardrails, can be obtained from any Coaster Furniture Dealer.
Warning Label: Do not remove the warning label from the bed.
Repair/Modification: Do not attempt to repair or modify broken or defective parts; contact the store immediately.
Instructions Retention: Keep the assembly instructions for future reference.