22
12. BILGE INSTALATION
The bilge system is installed in the galley under the floor.
Bilge pump suction nozzle Hand bilge pump inside locker
1. Electric bilge pump,
2. Bilge pump suction nozzle,
3. Bilge houses,
4. Bilge pump outlet,
On the boat is equipped with two automatic bilge pumps and one manual bilge pump.
Automatic bilge pumps can work automatically after power-up the float switch (which is
location near sucking pump basket) or by hand operating from the switch panel if it is
necessary.
DANGER
Installed bilge installation is not intended to dry the damaged boat
.
WARNING
Before each season check the state of connections and the tightness of bilge
installation.
Check in regularly the work of the bilge pump.
Regularly remove dirt from inlet of sucking bilge pump basket.
Never use the flammable solvents to cleaning of bilge.
CAUTION
Do not discharge oily water overboard, in moment when boat is afloat.
CAUTION
It is recommended to have the bucket on boat which you can use in sudden
cases.
To Next Page
Loading...