What to do if there is loose hardware in the Teleflex steering system of my Cobalt Digital Inc A40?
If you notice loose or missing hardware in the Teleflex steering system, ensure all attaching hardware, bolts, and nuts are retorqued according to the manufacturer’s specifications. This should be done after a few hours of operation and at regular intervals thereafter to maintain the integrity of the steering system.
General| Brand | Cobalt Digital Inc |
|---|---|
| Model | A40 |
| Category | Boat |
| Language | English |
Introduction from the manufacturer and dealer, emphasizing enjoyment and safety.
Defines the boat's purpose as a pleasure and sport craft.
Explains wave height categories for boat design.
Stresses reading the manual and component manuals before operation.
Outlines procedures for obtaining warranty service from authorized dealers.
Details Cobalt's membership and certification with the National Marine Manufacturers Association.
Explains the MerCruiser Program for product quality improvement.
Describes the Volvo Penta Program's commitment to quality and customer satisfaction.
Highlights classic styling and performance features like Kevlar and vinylester resins.
Mentions warranty terms and industry standards used in boat construction.
Advises listing serial numbers for identification and safe storage.
Details responsibilities before, during, and after boat delivery and operation.
Explains USCG registration requirements and obtaining forms from dealers.
Details the permanent tank, vent system, and anti-siphon valve.
Explains the engine compartment ventilation system with blowers.
Provides essential pre-outing checks and safety advice for boaters.
Outlines basic nautical "Rules of the Road" and signaling conventions for collision avoidance.
Emphasizes familiarity with equipment and emergency planning before operation.
Warns about fuel/oil accumulation in bilge and proper fire extinguisher use.
Details approved fuel types and ethanol content for Cobalt fuel systems.
Provides instructions and safety precautions for fueling the boat.
Addresses issues like hard-to-fill tanks and nozzles shutting off.
Explains the "Green Tank Effect" and how to manage first-time fueling.
Lists essential safety equipment checks before launching the boat.
Basic instructions for starting the engine and maneuvering away from the dock.
Provides guidelines for safe boarding procedures, emphasizing stepping.
Essential pre-operation checks for safe boating and engine starting.
Lists specific pre-operation checks including detectors, seacocks, and hoses.
Advises checking gauges, controls, and fuel supply while operating.
Outlines post-outing procedures like securing equipment and checking for leaks.
A comprehensive pre-start checklist for ensuring boat and engine readiness.
Lists critical pre-start checks for safety and operation.
Essential safety rules to follow during operation.
Explains how to manage boat wandering at slow speeds.
Explains how drive unit trim affects boat performance, efficiency, and handling.
Advises on protecting the boat from saltwater damage and flushing the engine.
Provides guidance on protecting the propulsion unit drives from freezing damage.
Explains the calibration and potential variations in trim gauge readings.
Addresses potential "bouncing" of fuel gauges due to fuel sloshing.
Describes the small display screen for engine parameters and other data.
Explains the operation of trim tab switches for manual and automatic leveling.
Describes the 12-volt DC system supplying power to boat circuits.
Explains the location and function of DC batteries and their switches.
Explains the display showing freshwater and waste tank levels.
Step-by-step guide to disinfect the water tank and system for potable use.
Advises checking and maintaining the waste water system.
Introduces the section on mechanical, electronic, and manual operating systems.
Discusses care and cleaning of vinyl and interior fabrics.
Provides instructions for routine cleaning of vinyl surfaces.
Explains how to clean and maintain leather surfaces.
Details common maintenance options like vacuuming and mopping for Plynyl.
Provides instructions for cleaning and maintaining teak swim platforms.
Provides methods for removing rust and corrosion from stainless steel.
Advises applying CorrosionX to metal fixtures for protection.
Recommends annual treatment of electrical and plumbing connections.
Details monthly application of CorrosionX to steering and engine components.
Provides instructions for cleaning canvas fabric with mild soap and water.
Outlines routine maintenance tasks based on frequency.
Presents a chart detailing maintenance tasks by frequency.
Advises immediate notification of dealer for engine or system issues.
Emphasizes serious handling of electrical problems and dealer repair.
Stresses immediate dealer notification for any fuel system problems.
Explains the correct procedure for lifting the boat using slings.
Provides instructions for properly supporting the boat on a cradle or trailer.
Provides a chart for diagnosing and resolving common engine starting and running issues.
A concise guide to essential operational steps for boat use.
A checklist of critical tasks to perform before launching the boat.
Lists pre-operation checks for safety and system readiness.
To Next Page