Need help?Do you have a question about the Cobalt Digital Inc R3 BOWRIDER and is the answer not in the manual?
General| Brand | Cobalt Digital Inc |
|---|---|
| Model | R3 BOWRIDER |
| Category | Boat |
| Language | English |
10-year transferable warranty on hull, deck, stringers, bulkheads, motor mounts, and joints.
3-year transferable warranty on gelcoat finish, upholstery, canvas, and other components.
Details on conditions and components not covered by the limited warranties.
Defines the boat's purpose as a pleasure and sport craft.
Explanation of design categories like OCEAN - Category A for wave conditions.
Essential pre-operation steps including reading the manual.
Procedure for obtaining warranty service through authorized dealers.
Information regarding the included Extended Limited Service Agreement.
Instructions for transferring warranties to a new owner.
Details on NMMA certification and MerCruiser installation quality.
Cobalt's adherence to Volvo Penta's installation and quality standards.
Highlights performance features and industry standards used in construction.
Guidance on finding serial numbers for the boat and its components.
Information on state registration and USCG compliance for boats and trailers.
Mandatory personal flotation devices (PFDs) and throwable devices.
Requirements for day and night visual distress signals.
Rules for navigation lights and audible signaling devices.
Mandatory fire extinguishers for boat safety.
Suggested items for enhanced safety and emergency preparedness.
List of common spare parts to carry onboard for maintenance.
Resources for boating safety courses and skill enhancement.
Importance of obtaining boat insurance for liability and loss protection.
Brief explanation of remote control, steering, fuel, and ventilation systems.
Overview of major boat systems: electrical, cooling, and exhaust.
Details on lubrication systems and essential seaworthiness checks.
A checklist of critical items to verify before operating the boat.
Boater's responsibility to protect the natural environment and keep waterways clean.
Prohibitions on overboard dumping and environmental impact of fuel spills.
Information on CARB labels for engine emissions compliance in California.
Details on emission control warranty requirements for CARB-certified engines.
Information on chemicals used in components that may cause health effects.
Guidelines for proper waste disposal and marine sanitation system care.
Practices for managing noise, wake, and exhaust emissions responsibly.
Information on antifouling paints, safe cleaners, and fishery conservation.
Procedures to prevent the spread of foreign aquatic species between water bodies.
Recommendations for authorized dealer maintenance and repair services.
Preparing for emergencies and safe procedures for dealing with boat fires.
Procedures for grounding, operating in storms, and man overboard situations.
Guidelines for handling medical emergencies and drowning incidents.
Steps to take in case of propulsion, steering, or control system failure.
Information on federal requirements for distress signals and radio use.
Details on required types and uses of PFDs for safety.
Further details on PFD types and audible/visual distress signal protocols.
How to transmit distress calls using radio channels and signal types.
Illustrations and descriptions of various visual distress signaling devices.
Considerations for carrying life rafts and using sea anchors offshore.
Importance and mounting of radar reflectors to enhance vessel visibility.
Explanation of safety alert symbols and signal words used in the manual.
Essential checks and practices for safe boating excursions.
Guidelines for passenger seating to ensure safety while underway.
Importance of handholds and knowing the boat's weight capacity.
Guidelines for load distribution and maintaining boat trim for safe operation.
Navigating various operating conditions and responding to weather changes.
Recommendations for practicing boat operating skills in safe conditions.
Ensuring clear visibility and awareness of surroundings for safe navigation.
Strict warnings against operating a boat under the influence of alcohol or drugs.
Ensuring passengers are aware of safety rules and boat operation.
Information on CO detectors, symptoms of poisoning, and testing procedures.
Recommendations for seeking additional training for boat operators.
Adherence to maritime traffic laws and enforcement procedures.
Rules for discharging oil, waste, and managing noise levels.
Requirements for reporting accidents to the proper marine law enforcement agency.
Legal obligation and procedures for providing assistance to others.
Safe practices and hand signals for participating in water sports.
Key safety rules for participants in water sports activities.
Critical safety warning against dangerous activities like platform dragging.
USCG alert regarding carbon monoxide risks from 'Teak/Drag Surfing'.
Basic nautical rules for collision avoidance and sound signal usage.
Standard whistle and horn signals for communicating intentions and dangers.
Definitions and responsibilities of privileged and burdened vessels.
Rules for determining right-of-way in crossing scenarios.
Guidelines for vessels meeting head-on, including passing signals.
Rules for overtaking another vessel, defining privileged and burdened roles.
Considerations for operating at night, including lights and visibility.
Introduction to navigation aids and common types of buoys.
Guidelines on permitted mooring locations and illegal mooring practices.
Explanation of regulatory markers indicating speed zones and controlled areas.
How to identify and navigate around isolated danger markers.
Information on light structures and minor lights used for navigation.
Essential checks before starting the engine for the first time.
Safety measures to prevent fires and explosions during operation.
Guidelines on using correct fuel types and avoiding high ethanol content fuels.
Precautions to take during fueling to prevent injury, fire, or explosion.
Detailed steps for adding fuel, including nozzle contact and cap closure.
Actions to take after fueling, including checking for leaks and running the blower.
Description of EPA-compliant fuel systems including carbon canisters.
Solutions for common problems like hard-to-fill tanks or auto-shutoff nozzles.
Pre-launch safety and equipment checks required by federal and local laws.
Safe practices for operating the boat on water and boarding.
Guidelines for load distribution, weight management, and securing gear.
Essential checks and procedures to follow before starting the engine.
Checks to perform during operation and steps to take after boating.
Techniques for using dock and mooring lines to secure the boat.
Procedures for starting engines, shifting gears, steering, and stopping.
Ensuring proper operation of CO detectors for safety.
Step-by-step guide to starting the boat's engine safely.
A comprehensive checklist of items to verify before starting the engine.
Safe procedures for shifting gears and operating the boat.
Information on the steering system, its maintenance, and safety precautions.
Steps for safely shutting down the boat's engine.
Guidelines for safely departing from a dock or mooring.
Safe approach and docking procedures when returning to port.
Step-by-step guide for maneuvering into a boat slip.
Techniques for approaching and securing to a mooring buoy.
Tips for handling boat wandering at slow speeds.
Explanation of load distribution, drive unit trim, and trim tabs affecting boat trim.
Guidance on distributing weight for optimal boat performance and balance.
How drive unit trim affects boat performance, speed, and handling.
Steps for adjusting trim tabs and drive trim for optimal underway attitude.
Critical safety advice for operating the boat at high speeds, especially in turns.
Guidance on choosing propellers and monitoring engine RPM.
Safe practices for anchoring, including anchor selection and placement.
Instructions for operating the electric or manual windlass system.
Guidelines for safe towing, including tow line rating and attachment points.
Detailed steps for deploying, setting, and retrieving the anchor.
Adjusting tow lines for wave action and understanding boat structure strain.
Maintaining the boat in salt water and freshwater flushing procedures.
Protecting the boat from freezing and proper drive unit storage.
Details on the Data Interface Gauge (DIG) and auxiliary gauge system.
How the instrumentation system starts up and shuts down.
Information on tachometers, trim gauges, fuel gauges, and instrument fogging.
Overview of the gauge cluster, system architecture, and startup.
How to navigate gauge information and operate LCD displays.
Explanation of the alarm system, including low pressure and low lube alarms.
Operation of bilge blower, bilge pump, and interior lighting switches.
Control of docking lights, horn, and engine exhaust routing.
Operation of underwater, platform, and anchor/mooring lights.
Proper use of navigation lights and accessory switch.
Operation of the stereo remote control and ignition switch.
Adjusting tilt steering and using the 12V accessory power receptacle.
How to operate the shift/throttle lever and drive unit trim switch.
Importance and use of the ignition safety switch for emergency shutdown.
Safe operation of remote controls and shift/throttle hardware.
Control of lighting levels and function of circuit breakers.
Operation of the electric motor box hatch and optional courtesy lights.
How to activate the water pressure pump for the transom shower.
List of standard and optional canvas features like bimini and tonneau covers.
Standard and optional features for the dash and exterior of the boat.
List of standard and optional interior features like seating and floor coverings.
Details on available stereo systems, speakers, and remote controls.
Information on hull structure, warranties, and safety features.
How to adjust and operate the captain's chair for optimal comfort and visibility.
Instructions for deploying and raising the flip-down swim step.
Information on the Volvo Penta Ocean Series Outdrive and Neutra-Salt switch.
How to open and close the windshield using the latch mechanism.
Operation of optional cockpit dinette table and access to the ice chest.
Installation of bow seat cushion and use of the optional air compressor.
Installation of anchor light and operation of optional cruise control.
How to use the dual battery switch for isolation and power management.
Explanation of the ACR's function in managing battery charging and isolation.
Details on the 12V DC water pump and freshwater system operation.
Procedures for attaching the optional bow and cockpit tonneau covers.
Instructions for installing, adjusting, and storing the optional bimini top.
Steps for assembling and attaching the bimini top to the dagger arch.
How to raise and lower the electric dagger arch with bimini.
Instructions for installing the bimini top on an SS arch.
Identifying secure points for tie-downs when the boat is moored.
How to use the remote transom tilt switch to raise or lower the drive unit.
Safe procedures for opening and closing the motor box assembly.
Information on the optional tool kit for minor repairs.
Diagram illustrating the fresh water system components.
How to operate and clean the boat's freshwater system.
Information on the automatic fire extinguisher system and its activation.
Description of the boat's 12-volt DC electrical system.
Methods for cleaning light soiling and stubborn stains on vinyl.
Routine maintenance, cleaning frequency, and care for Plynyl flooring.
Effective cleaning methods using vacuum cleaners and mops.
Using Crystal Dry and GLS system for thorough carpet cleaning.
Techniques using rotary bonnets and auto-scrubbers for floor cleaning.
Information on professional maintenance providers for interior care.
How to clean cabinetry and the woodgrain dash, avoiding certain chemicals.
Maintenance instructions for teak swim platforms and cedar wood.
Methods for cleaning carpet and exterior fiberglass/gelcoat surfaces.
Using paste wax for UV protection and mooring cover recommendations.
How to clean and protect stainless steel and chrome components.
Recommended application of CorrosionX on rails, fittings, and engine compartments.
Understanding galvanic corrosion and the use of sacrificial anodes.
Procedures for washing the boat after use in salt water.
Instructions for maintaining Sunbrella canvas, including cleaning methods.
Methods for cleaning heavily soiled fabric and treating mildew.
Care for clear vinyl curtains and maintenance of zippers.
Proper methods for unsnapping fasteners and using lubricants.
How to clean the windshield and maintain a clean bilge area.
Recommendations for applying anti-fouling paint to prevent marine growth.
Chart outlining maintenance tasks based on frequency (Break-In, Before Every Use).
Essential break-in procedures and pre-use checks for safety and performance.
Maintenance tasks required at 50-hour, 100-hour intervals, and monthly.
Tasks recommended for quarterly professional maintenance by a dealer.
Specific monthly checks and quarterly dealer services outlined.
Addressing unscheduled issues in engine, electrical, and plumbing systems.
Ensuring fuel and water systems are functional, especially before cruising.
Correct procedures for lifting the boat using slings to prevent structural damage.
Proper positioning and use of storage cradles for hull support.
Key items requiring attention for winter lay-up and freeze damage prevention.
Essential checks and preparation steps before the next boating season.
Procedure for winterizing the optional cockpit heater system.
Assistance for locating and repairing minor problems with the boat.
Diagnosing problems with electrical components and circuit breakers.
Diagnosing and resolving issues with the water system and head.
A summary of essential checks before launching the boat.
Key checks to perform before starting the engine and operating the boat.
Step-by-step guide for starting engines and safely leaving the dock.
Checks during operation and procedures for returning to port.
Procedures for stopping the engine and tasks to perform after boating.
To Next Page