10
For blood application inside the meter:
Apply the hanging drop of blood
immediately from the finger to the
yellow application area of the Accutrend
Cholesterol test strip. Do not touch the
application area with your finger.
Continue with step (12).
11
For blood application outside the meter:
Remove the Accutrend Cholesterol test
strip and leave the flap open. Apply the
hanging drop of blood immediately
from the finger to the yellow application
area of the test strip. Do not let the
application area come into contact with
your skin. Insert the Accutrend
Cholesterol test strip back into the
meter.
You can apply blood with the strip
inside or outside the meter.
To avoid incorrect results, make sure
the application area is completely
covered with blood.
To Next Page
Loading...
Need help?
General