Need help?Do you have a question about the Cobra 19 DX II and is the answer not in the manual?
General| Brand | Cobra |
|---|---|
| Model | 19 DX II |
| Category | Two-Way Radio |
| Language | English |
Lists the specific channel frequencies from 1 to 40 used by the CB radio.
Details on channels, frequency range, tolerance, operating temperature, and input voltage.
Covers power output, modulation type, and frequency response for transmitting.
Outlines receiver sensitivity, selectivity, image rejection, and IF frequencies.
Specifies power output for the Public Address system.
Planning the transceiver and microphone bracket placement for convenience and safety.
Details on securing the transceiver using the mounting bracket and marking screw locations.
Discusses antenna types and proper connection for optimal transmission distance.
Explains sources of electrical noise and how to mitigate it for better reception.
Identifies and explains the function of front panel controls and indicators.
Details the SO-239 antenna connector, PA jack, and external speaker jack.
Step-by-step guide on how to set up and listen to incoming signals.
Instructions for transmitting, including microphone usage and antenna connection.
Guidance on checking power, fuse, microphone, and antenna connections.
Lists common CB radio 10-codes and their corresponding meanings.
Outlines essential rules and regulations for operating a CB radio.
Examples of permitted and prohibited communications for Channel 9.
To Next Page