Do you have a question about the Cobra 200GTL DX and is the answer not in the manual?
Power Supply | 13.8V DC |
---|---|
Antenna Connector | SO-239 |
Antenna Impedance | 50 ohms |
Frequency Range | 26.965 to 27.405 MHz |
Modes | AM/SSB |
Output Power | AM: 4W, SSB: 12W PEP |
Channels | 40 |
RF Output Power | AM: 4W, SSB: 12W PEP |
Lists general operating parameters like frequency range, temperature, and power.
Details transmitter output, receiver sensitivity, and other technical parameters.
Provides details on external speaker impedance and output indicators.
Provides guidance on selecting a location and mounting the transceiver.
Explains how to connect the power and antenna cables.
Details the procedure for adjusting the antenna for the best standing wave ratio.
Details the CW/FM/AM/USB/LSB mode selection and High/Low Power buttons.
Explains how to use the SWR/S/RF, Dim/SWR CAL, and SWR CAL controls.
Explains the 6-digit numeric and Dual 7 Segment frequency displays.
Details the Band A/B/C/D knob for selecting frequency ranges.
Step-by-step guide on how to operate the radio for receiving signals.
Step-by-step guide on how to operate the radio for transmitting signals.