Cobra 29 NW - Operation - Controls; Dimmer Switch; Setting Squelch

Full clockwise rotation closes the gate
allowing only very strong signals to enter.
Full counterclockwise rotation opens the
“gate” allowing all signals in.
To achieve the Desired Squelch Setting (DSS),
turn the Squelch control counterclockwise
until you hear noise. Now turn the control
clockwise just until the noise stops. This is the
DSS setting.
Dimmer Switch
Setting Squelch
Squelch is the “control gate” for incoming signals.
17
Dimmer Switch
16
Operation
Operation
1
2
1
3
Rotate the Dimmer knob clockwise
for maximum brightness; counter-clockwise
for minimum.
CH9
HI
NOR
MIN MAX
DYNAMIKE
RFGAIN
TONE
29 NW LTD CLASSIC
R
DIMMER
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS

G AT E C L O S E D
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS

G AT E  O P E N
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS

NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS
G AT E
Gate open
Gate set to Desired
Squelch Setting (DSS)
Gate closed
DIMMER
HI
NOR
MIN MAX
RX/TX ANT
29 NW LTD CLASSIC
TONE
DIMMER
HI
NOR
MIN MAX
RX/TX ANT
29 NW LTD CLASSIC
TONE
Setting Squelch
DIMMER
HI
NOR
MIN MAX
RX/TX ANT
29 NW LTD CLASSIC
TONE
Note
The Dimmer controls the
brightness of the front panel,
signal strength meter and
channel display.
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281