Cobra 38 WX ST How To Use

Hold mic about
2 inches from
mouth. Speak
in a normal
voice.
3
Operation
Operation
Transmit / Receive
9
Note
While PTT button is
depressed you cannot
receive transmissions.
Stop
Antenna must be
installed before TX
Note
Your HH38 WX ST is always
ready to receive incoming
signals when the PTT button is
released.
When you are receiving an
incoming signal, the strength
of that signal will be displayed
on the bar graph.
8
The TRANSMISSION POWER METER will be
displayed when transmitting.
To transmit, push and hold PTT button.
1
Release PTT button to receive incoming
transmissions.
3
2
The INCOMING SIGNAL STRENGTH METER will be
displayed when a signal is received.
Note
During transmit, your
outgoing transmission power
is measured in watts and
displayed on the bar graph.

Cobra 38 WX ST Specifications

General

Brand	Cobra
Model	38 WX ST
Category	Radio
Language	English