Cobra 38 WX ST How To Use

Push SCAN key. The channels will index.
To stop scanning, push SCAN key again.
To return to original channel, push
CH 9/19 a third time.
Push CH 9/19 once for channel 9.
Operation
Operation
11
One Touch for
Channel 9 and
Channel 19
10
One Touch For Channel 9 and Channel 19
To gain instant access to Channels 9 (emergency)
and 19 (information) from other channels:
Scan
Func
CH9/19
DW
Lock
CB/WX
Pwr Saver
PUSH &
RELEASE

PWR SAVE WX
SCAN DW
FUNC
SIGNAL
Push CH 9/19 twice for Channel 19.
Note
When an incoming
transmission is received the
HH 38 WX ST will stop scanning.
10 seconds after scan stops,
scanning will resume.
Note
To set Desired Squelch Setting
(DSS) see Setting Squelch on
pages 4 and 5.
Pressing PTT key or scan key will
terminate scan mode.
All Channel Scan
To scan all 40 channels:
Set Desired Squelch Setting (DSS).
All Channel Scan
1
2
3
1
2
3
Note
Pressing CHANNEL UP/
DOWN key will exit you
from this mode.

Cobra 38 WX ST Specifications

General

Brand	Cobra
Model	38 WX ST
Category	Radio
Language	English