REAR SUSPENSION UNITS
1. Rear upper wishbone.
2. Upper Wishbone to rear upright spherical ball joint.
3. Rear brake caliper.
4. Shock absorber bottom mounting, reference to page 36.
5. Nylon bushes rubber and metal seals.
6. Chrome pin.
7. Trailing link, to lower wishbone, bearing.
( 8. Trailing link.
9. Trailing link to chassis bearing.
10. LOwerrear wishbone.
11. Lower wishbone inner bearing.
12. Differential front support, reference to page 4.
13. Upper wishbone inner bushes.
14. Differential sidehanger bearings, refer to page 4.
15. Shock absorber top mounting refer to page 36.
Note:
Part numbers for suspension units above-are itemised on page 14.
Shock absorber bearings page 36.
(
15
To Next Page
Loading...