Cobra 427 User Manual

SUSPENSION UNITS
Upper Rear Wishbone Assembly (Photograph page IS)
Wishbone Welded Assembly C.66823 (Fig. 1 photograph)
Spherical Bearing Joint to Rear Vertical Link (Fig. 2 photograph)
Spherical Bearing Rod End RBJ-76 (Fig. 2)
Lock Nut i" B.S.F. (Fig. 2)
Rubber Dust Shield R.R.S8 (Fig. 2)
Spacer R.R.W.8 (Fig. 2)
1"B.S.F. 2i" Bolt (Fig. 2)
1" B.S.F. Self-locking nut (Fig. 2)
Upper Rear Wishbone Assembly Inner Bushes (Fig. 13 photograph)
Bush Metalastic 13/935 (Fig. 13)
Special Bolt D-67179 (Fig. 13)
i" B.S.F. Self-locking Nut (Fig. 13)
Wishbone Pivot Cup D-66819 (Fig. 13)
Lower Rear Wishbone Assembly (Fig. 10 photograph)
Welded assembly Number B-66881-2
Inner Lower Wishbone Bearing (Fig. If)
Adjusting Nut D-66829 (Fig. 11)
Sleeve D-66828 (Fig. 11)
o Ring (Superfect) S.H.96-307 (Fig. 11)
Spherical Bearing (Rose) RBJ-210 (Fig. 11)
Circlip (Anderton) NAM-1300 (Fig. II)
Wishbone Pin and Bearings (Fig. 6 photograph)
Nylon bushes 12DU-16 (Fig. 6)
Rubber and metal seals 07S-IOO-SBW (Fig. 6)
Clamp Bolts -!;,", Ii", !i" nut (Fig. 6)
Chrome Pin D-668S1 (Fig. 6)
Rear Suspension Trailing Link (Fig. 8 photograph) 66877C
Trailing Link to Wishbone Bearing (Fig. 7)
Spherical Bearing and Circlip RBJ-20S/Seeger Circ1ip !i" int. (Fig. 7)
3" Bolt (Fig. 7)
Two packing pieces (Fig. 7)
1" Locking Nut (Fig. 7)
Trailing Link to Chassis Bearing (Fig. 9 photograph)
Spacer R.R. W.8 (Fig. 9)
Rubber Dust Seal R.R.S.8 (Fig. 9)
Spherical Bearing End Rod R.B.J.76 (Fig, 9)
i" B.S.F. Lock Nut (Fig. 9)
S" Bolt Xj-" (Fig. 9)
j-" Locking Nut (Fig. 9)
Two packing pieces (Fig. 9)
Ruhber Bushes-Metalastic 13/1667, or Silentbloc E2088 (Fig. 9)
14
(
(

Cobra 427 Specifications

General

Brand	Cobra
Model	427
Category	Chassis
Language	English