FRONT AND REAR SHOCK
ABSORBERS
(
The Armstrong Hydraulic Heavy Duty Damper is fitted as a standard
component to the suspension of the Cobra.
The damper is a double acting direct control unit which ensures a
smooth damping of the spring oscillations on both bump and rebound.
The design and development of this unit is the result of close cooper-
ation between A.C. Cars Ltd. and Messrs. Armstrong Ltd.
The damper is a self-contained and trouble-free unit and needs no
servicing attention of any kind.
By means of a special seal in the damper the hydraulic fluid is kept
in circulation in such a manner that leakage is not possible and therefore
no "topping up" is required at any time.
The valving control built into these units is the result of extensive and
exacting trials by Shelby America and A.C.
Should the dampers at any time require attention they cannot be
repaired by a garage or service station but should be returned to the A.C.
factory or Shelby American Inc. together with an order for replacement
units.
(
35
To Next Page
Loading...