WARNING: TO MINIMIZE THE RISK OF EYE INJURY, ALWAYS
USE EYE PROTECTION.
When using mechanical tools basic safety
precautions should always be followed to reduce the risk of personal
injury, including the following:
READ ALL INSTRUCTIONS
1. BE AWARE OF THE STAPLE EXIT POINT. The unique Cobra
™
forward
action
®
design puts the "high" part of the handle in the front. Be sure this
product is in the proper position in your hand before using.
2. POINT THE GUN AWAY FROM YOURSELF AND OTHERS at all times
and especially when opening the track to clear a jammed staple or nail. As the
track is opened, the jammed staple or nail may be shot out unexpectedly.
3. PLACE STAPLE EXIT POINT FIRMLY AGAINST WORK SURFACE
BEFORE FIRING. Staples fired "into the air" can cause serious injury.
4. ALWAYS USE THE PROPER STAPLE SIZE. This product accepts .05"
wire gauge heavy duty staples only. Do not try to use light duty (.03"), desk
or wire staples in this product.
5. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
6. CONSIDER WORK AREA ENVIRONMENT. Don’t expose tool to rain.
Keep work area well lit.
7. KEEP CHILDREN AWAY. All visitors should be kept away from work area.
Do not let visitors contact tool.
8. STORE IDLE TOOLS. When not in use, tools should be stored in dry, high
or locked-up place — out of reach of children.
9. DON’T OVERREACH. Keep proper footing and balance at all times.
10. STAY ALERT. Watch what you are doing. Use common sense. Do not
operate tool when you are tired.
11. BE CAUTIOUS NOT TO STAPLE INTO ELECTRICAL WIRES especially
those which may be hidden from view.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
IMPORTANT SAFETY INSTRUCTIONS
2
To Next Page
Loading...
General