Cobra AirWave - Pairing Your CobraAirWave; Initiate Pairing Mode; Connect from Media Device; Troubleshooting Pairing Issues

1BJSJOH:PVS$PCSBAirWave
™
In order to pair CobraAirWave
™
to your media device,
press the blue lighted button on CobraAirWave
™
for 3
seconds to put it into pairing mode. Go to the Bluetooth
®
Settings Menu on your media device. For most devices
this is found by pressing Settings
X
Bluetooth
®
.
1SFTTScan for Devices and/or wait for the device list to
populate and then select CobraAirWave
™
.
1BJSJOHDBOUBLFVQUPTFDPOET*GZPVBSFQSPNQUFE
to “Accept password to pair” press Conrm. When
CobraAirWave
™
is properly paired and connected,
“Connected” will be shown on your media device.
When CobraAirWave
™
is properly paired and connected to
your device the LED on the top of the unit will shine
blue.
For more information on pairing with Bluetooth
®
devices
consult your device’s owners manual.
If you are having trouble initializing or maintaining your
Bluetooth
®
connection, completely turn off your media device
and CobraAirWave
™
EFWJDFXBJUTFDPOETBOEUIFOUVSO
them back on.
Now that you are paired with and connected to
CobraAirWave
™
you’re ready to start streaming music.