1. Connect one 3.5mm end of the
included audio cable to the head-
phone jack of the CobraAirWave
™
.
2. Connect the other end (3.5mm or
2xRCA) to an audio input on your
home stereo system.
3. Slide power switch from OFF to ON.
Connect the micro-USB adapter
cable to the CobraAirWave
™
and
plug into USB-compatible power port.
4. The blue LED light will ash to indicate the unit is powered
and is now ready to be paired to your media device.
What’s in the Box
Setting Up CobraAirWave
™
3.5mm-3.5mm
Stereo Cable
3.5mm-RCA
Stereo Cable
Cobra AirWave
™
Bluetooth
®
Receiver
Micro-USB Cable
for Charging
To Next Page
Loading...
