To Next PageTo Next Page
Need help?Do you have a question about the Cobra CPI 2575 and is the answer not in the manual?
General| Output Voltage | 120V |
|---|---|
| Output Waveform | Modified Sine Wave |
| Input Voltage | 12V DC |
| Dimensions | 15.25" x 8.5" x 3.5" |
| Weight | 9.4 lbs |
| Efficiency | 90% |
| USB Ports | 2 |
| Output Power | 2500 Watts |
| Surge Power | 5000 Watts |
| USB Output | 5V |
Expresses gratitude for purchasing the Cobra CPI 2575 inverter and its expected reliability.
Explains the function of the power inverter and its conversion process from DC to AC power.
Outlines services offered for product issues, inquiries, and technical support.
Provides contact details for automated help, operators, and technical assistance in the USA.
Directs users to contact their local dealer for warranty and support information.
Lists the main features of the Cobra power inverter, including AC receptacles and protection systems.
Defines CAUTION and WARNING statements to alert users to potential hazards.
Provides essential precautions for installation, use, and operation to prevent damage or injury.
Warns about potential damage to certain rechargeable appliance chargers when connected.
Describes the modified sine wave output and its suitability for various AC loads.
Lists the necessary items, including a 12V DC source and cables, for pre-installation testing.
Step-by-step guide to test the inverter's performance before final installation.
Details requirements for dry, cool, ventilated, and safe installation areas for the inverter.
Advises installing close to the battery to minimize DC cable length and voltage drop.
Describes how to mount the inverter securely to a flat surface using mounting brackets.
Recommends #4 AWG copper cable and specifies stripping length for secure connections.
Details connecting red (+) and black (-) cables to the inverter's input terminals securely.
Explains connecting the negative and positive terminals to the power source.
Specifies connecting positive to positive and negative to negative terminals for safe operation.
Advises on electrical codes, avoiding AC source connection, and main fuse installation.
Explains how to calculate required battery ampere-hour capacity based on equipment usage.
Guides users on calculating total energy consumption in watt-hours for planning.
Details connecting the chassis ground screw to a grounding point for safety.
Step-by-step guide on how to turn the inverter on and off.
Explains the power button controls the circuit, not disconnects power, and notes low current draw.
Describes the optional remote switch for convenient on/off control from a distance.
Explains how input and output indicators toggle and display voltage or power values.
Details indicators for overload and short circuit protection and how to restore operation.
Explains indicators for low/high voltage protection and restoration procedures.
Describes the over-temperature indicator, alarm, and shutdown behavior for protection.
Details continuous and surge power limits, and motor starting surge currents.
Specifies the operating input voltage range and protection thresholds.
Lists common issues like low output, no output, and low battery alarm with causes and solutions.
Provides a list of technical details like output power, efficiency, input voltage, and temperature ranges.
Details the warranty terms, coverage, and exclusions for products purchased in the USA.
Advises contacting local dealers for warranty information outside the USA.
Lists registered trademarks of Cobra Electronics Corporation.
Guides on cleaning the unit and tightening terminals for proper operation and longevity.
Explains the process for getting the product serviced or repaired at the Cobra factory.
Describes the optional remote switch and its functionality for convenient control.
Provides instructions on how to order accessories and products from Cobra.
