3. Operating The ESD-6100:
A. Turn On and Adjust Volume
B. Set Display Brightness
C. Set City/Highway Mode
D. Muting
E. LaserEye
F. Indicators and Visual Alerts
Power
X Band Radar
K and Ka Band Radar
Laser
VG-2
Safety Alert
®
Traffic Warning System
City/Highway Mode
NORMAL
LOW
OFF
Installing and Using Your
DETECTION SYSTEM
Model ESD
™
-6100
U.S. Patent No. 5,497,148
Cobra Electronics Corporation
6500 West Cortland Street,
Chicago, Illinois 60707
PRINTED IN JAPAN ©1997 COBRAELECTRONICS CORPORATION 480-261-P-001
1. What You’ll Need To Install The ESD-6100:
NOTE: Detailed instructions on opposite side
ESD-6100 Windshield Bracket Hook and Loop Material Power Cord
(For on-dash mounting)
ON WINDSHIELD ON DASH
ATTACH CUPS TO BRACKET PEEL PROTECTIVE PAPER OFF ONE SIDE OF HOOK AND LOOP
ATTACH BRACKET TO WINDSHIELD PLACE ON DASH
ATTACH DETECTOR TO BRACKET PEEL TOP PAPER OFF
BEND BRACKET FOR CORRECT DETECTION ANGLE (IF NEEDED) PLACE DETECTOR ON HOOK AND LOOP PAD
PLUG POWER CORD INTO DETECTOR POWER CORD INTO DETECTOR
PLUG POWER CORD INTO CIGARETTE LIGHTER PLUG POWER CORD INTO CIGARETTE LIGHTER
2. Installing The ESD-6100:
NEED HELP?
CITY: For urban
driving-reduces
number of X-Band
false audible alerts.
HIGHWAY: For all
other driving.
Press to reduce
volume of audible
alert in progress.
360° Laser
Detection
LEDs are briefly
illuminated at
Power ON
Illuminates when On
Blinks faster as source approaches
Blinks at a steady rate Both turn on
Blinks at a
steady rate
All Flash
Turn on sequentially as source approaches
Blinks faster as source approaches Turn on sequentially as source approaches
Illuminates when in CITY mode
➧
➧
➧
➧
ESD-6100.MANUAL.qx 10/23/98 3:45 PM Page 1
To Next Page
Need help?
General
