To turn
Auto Mute
off
To turn
Auto Mute
on
Procedure
Press and release
the MUTE button
while no alert
is occurring.
Press and release
the MUTE button
again while no
alert is occurring.
Tone
1 beep
2 beeps
Visual Display
none
none
3
O P E R A T I O N • S E T T I N G S
3
O P E R A T I O N • S E T T I N G S
Muting an Alert
Your detector allows you to quickly turn off
an audio alert by momentarily pressing the
MUTE button. If you press the MUTE button
a second time during the alert, the audio
alert will be turned back on.
Auto Mute Mode
Auto Mute will automatically reduce the
audio volume of all alerts after 4 seconds
for as long as the signal is detected.
The factory setting for Auto Mute is On.
9
8
MUTE button
Press and release
IntelliMute
®
IntelliMute
®
is a unique new feature of the
detector that allows you to avoid alerts you
don’t need to hear because you are stopped
or moving slowly. By sensing the ”revs“
(RPMs) of your engine, IntelliMute
®
knows
when you are at low speed and
automatically mutes alerts (except for strobe
signals from emergency vehicles).
Before IntelliMute
®
will work, you must
set an activation point for your engine's
revs (see page 11). Whenever the revs are
below that point, IntelliMute
®
will begin
muting. The activation point will be stored
in memory and recalled each time the power
is turned on.
The factory setting is IntelliMute
®
Off.
NOTE: IntelliMute
®
may not work with
some vehicles because it cannot sense the
engine’s revs. In such cases, you can reduce
unwanted audio alerts by using Auto Mute
and City mode when appropriate.
To turn
IntelliMute
®
on
To turn
IntelliMute
®
off
IntelliMute
®
button
Press and release
Procedure
Press and release the
IntelliMute
®
button.
Press and release the
IntelliMute
®
button again.
Tone
2 beeps
1 beep
Visual Display
dot appears next to
the large character
on the right
none
To Next Page
Loading...
