Press and release MUTE button to reduce
volume.
Operation
13
Operation
12
Muting Mode
Muting Mode
The ESD-9200 offers two Mute Modes; Auto and
Manual. To switch between these modes:
Note
Mute=“Beep”
OR
Auto Mute=“Beep-Beep”
Note
In either mode the next
alarm will begin with nor-
mal volume.The ESD-9200
wil retain the chosen mode
while OFF.
1
Press and release MUTE button when no sig-
nal is being received. In Auto mode,the alarm
will be reduced in volume after three seconds.
1
Auto Mode
Manual Mode
Memory Set
Remembers settings of Dim, Muting and
City/Highway modes and Voice vs.Tone.
Memory Set
Auxiliary Audio Jack
Use to connect an external speaker to your Cobra
ESD-9200 in environments with high ambient
noise levels.The internal speaker will be discon-
nected.The audio output will be voice or tone
depending on your selection.
Auxiliary
Audio Jack
Tone Alarm
And Voice
Alert
Voice/Tone Settings
Press and hold MUTE button for two seconds
to change between Voice and Tone Alarms.
1
9200.MANUAL 8/9/00 12:19 PM Page 12
To Next Page
Loading...
