Cobra Fi2000 - Troubleshooting and Default Settings; Trouble Shooting Guidance; Wiring Diagram References

23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180, Fax. 714.692.5016
www.fi2000r.com
09/07
3
Instruction Manual >
692
-
1607CL
Page 3 of 4
TROUBLE SHOOTING
If you have any problems refer to Step 11 in the main body of the instructions.
DOCUMENT NO
. 0018
REV. A
FIGURE 2
FRONT FEMALE Fi2000
INJECTOR CONNECTOR
ON FRONT INJECTOR
ORIGINAL FRONT FEMALE
H.D. INJECTOR
CONNECTOR WITH MALE
Fi2000 INJECTOR
CONNECTOR
REAR FEMALE Fi2000
INJECTOR CONNECTOR
ON REAR INJECTOR
ORIGINAL REAR H.D.
INJECTOR CONNECTOR
WITH MALE Fi2000
CONNECTOR
FIGURE 1
Fi2000 MODULE
FRONT
ECU
CONNECTOR
GROUND WIRE
CONNECTED TO
NEGATIVE
BATTERY
TERMINAL
O
2
SENSOR
HARNESSES
ROUTED
FROM HERE
TO UNDER
BATTERY
FEED O2
HARNESSES
BETWEEN FRAME
RAIL AND STOCK
HARNESS
FIGURE 3 FIGURE 4
FI2000
HARNESS
WITH O
2
SENSOR
CONNECTO
R
STOCK
HARNESS
WITH FI2000
FEMALE
HARNESS
CONNECTOR
BATTERY
TRAY