Do you have a question about the Cobra microTalk CXR800 and is the answer not in the manual?
Brand | Cobra |
---|---|
Model | microTalk CXR800 |
Category | Two-Way Radio |
Language | English |
Describes various uses of the microTALK radio for convenient communication.
Explains how to use the belt clip for secure and easy carrying of the radio.
Provides contact details for customer support services within the United States.
Directs users outside the U.S.A. to contact their local dealer for service.
Describes the radio's display elements and icons for easy readability.
Covers limited one-year warranty, battery warranty, and trademark information.
Instructions for installing, replacing, and charging the rechargeable battery pack.
Covers radio charging procedures and initial setup for basic operation.
Explains turning on the radio, standby mode, and the process for talking.
Covers channel selection, listening for responses, and using the call button.
Explains Hi-Low power settings and display illumination using the Light/Max Range button.
Explains auto squelch and how to use the maximum range extender feature.
Details how to activate and deactivate the lock feature to prevent accidental presses.
Describes speaker/mic/charge jack, and the signal strength meter function.
Lists the available mode functions for setting radio features and preferences.
Guides on selecting CTCSS privacy codes for interference reduction.
Guides on selecting DCS privacy codes for interference reduction.
Instructions for tuning into NOAA weather and hazard radio broadcasts.
Explains VOX mode for hands-free operation and sensitivity level settings.
Details how to store and recall frequently used channels and privacy codes.
Guides on switching between CTCSS and DCS privacy codes for channels.
Instructions on how to access previously programmed memory locations.
Explains how to remove stored memory locations from the radio.
How to automatically scan through available radio channels.
Options for interacting with transmissions during channel scan.
Guides on scanning privacy codes (CTCSS/DCS) within a selected channel.
Options for interacting with transmissions during privacy code scan.
How to automatically scan through programmed memory locations.
Options for interacting with transmissions during memory location scan.
How to configure audible call tones, silent vibration, or both.
Allows selection of one of ten different call tone settings.
Enables or disables audible beeps when pressing radio buttons.
Enables or disables an audible tone confirming end of transmission.
Chart detailing FRS/GMRS frequencies, channel numbers, and service types.
Information on the FCC license requirement for GMRS frequencies.
Important safety guidelines related to RF exposure and device usage.
Instructions for obtaining factory service and necessary documentation.
Directs users outside the U.S.A. to contact their local dealer for service information.