6
English
Using Your Radio
Selecting a Channel
1. With the radio On, select any of the
14 channels by pressing the
Channel Up
or Channel Down button.
Both radios must be tuned to
the same channel to communicate.
Channels 1 through 7 are shared with FRS/
GMRS. Channels 8 through 14 are FRS only.
See page 8 for FRS frequency
allocations and compatibility charts.
Listening for a Response
When You are Finished Talking:
1. Release the Talk button to receive incoming
transmissions. Your microTALK
®
radio is
always in
Standby Mode while the Talk or
Call buttons are not pressed.
Adjusting the Volume
1. Adjust the volume by pressing the
Volume Up or Volume Down button.
Calling Another Person
1. To alert another person that you are
calling, press the
Call button.
The other person will hear a two (2) second
ringing tone. You cannot send or receive
transmissions during the two (2) second
call tone.
Operation
Channel Select
Call Button
Listening
Adjusting Volume
To Next Page
Loading...
Need help?
General
