Note
If you wish to proceed to the
next Function Mode,press and
release Mode Button.
Advanced Features
24
Scan Function continued
Your microTALK will pick it up for 10 seconds.
Within 10 seconds you can:
Press and hold Talk button and talk.Your ra d i o
will re t u rn to Ope rational Mode on that channel.
or...
Press and release Channel Button up or down
to rescan the main channel.
To exit the Scan Mode and return to
Operational Mode:
Scan Function
1 Press and release Mode Button.
Advanced Features
25
Ringer/Vibrate Modes
Your microTALK will signal you that there is an
incoming transmission with either a tone or a
vibration or both.To set for Ringer/Vibrate:
Turn on microTALK.An audible “tone”will
indicate the unit is on and then the LCD will go
through a 3 second self-test and then go to
Operational Mode.
Ringer/Vibrate
Modes
Press and release Mode Button until
icon flashes.
Press Channel Button up and down until
icon appears for Ringer Only Mode.
continued
FRS305 MANUAL.qx 12/5/00 9:56 AM Page 24
To Next Page
Loading...
Need help?
General
