Press and release Mode Button again.
Main Channel and icon will flash.
Select desired main channel you wish to store
(1-14) by pushing the Channel Button up
or down.
Advanced Features
17
Note
Once you enter Memory Mode
you can talk and listen to any
channel you select after pro-
gramming is
complete. See Using Memory
Locations section on
page 19.
Advanced Features
16
Programming
Memory
Locations
Programming Memory Locations continued
continued
Push the Channel Button up or down to set
the main channel in memory and move to
subchannel selection. The subchannel begins
flashing.The icon will remain flashing.
Select desired subchannel you wish to store
(00-38) by pushing the Channel Button up
or down.
Note
Push and hold the Channel
Button up and down or fast
channel advance.
Note
You can push and hold the Talk
Button to begin talking any-
time.
FRS305 MANUAL.qx 12/5/00 9:56 AM Page 16
To Next Page
Need help?
General
