- 9 -
Fig.2
5.3 MOUNTING AND DISMOUNTING THE GRASS CATCHER
1. To fit: Raise the rear cover and hitch the grass catcher on rear of mower. (Fig. 3A) (Fig.3B)
2. To remove: grasp and lift rear cover, remove grass catcher.
Fig. 3A Fig. 3B
5.4 STARTER HANDLE
Move the starter handle from the engine to the rope guide, where fitted.
Fig.4
5.5 HEIGHT OF CUT
Apply outward pressure to disengage lever from rack. Move lever forward or back to adjust height. (Fig.5 and see clause 7.9)
Fig. 5
To Next Page
Loading...
