2
The TX / RX indicato r
will be displayed.
Note
Both units must be ON and
tuned to the same channel.
Your incoming “Call”signal
volume is dependent on the
unit volume s e t t i n g.
Operation
6
Calling Another Party
To alert another party that you wish to
communicate:
Talking To Another Party
Push and release CALL button.The unit
you are calling will hear a two second ringing
tone.
Calling
Another
Party
Note
While the TALK button is
depressed you cannot
receive incoming calls.
Talking To
Another Party
1
3 4
1
Release TALK
button and listen for
response.
Hold mic about 2 inches
f rom mouth.Speak in a
n o rmal vo i ce.
Push and hold
TALK button.
FRS_225 3/2/01 3:23 PM Page 6
To Next Page
Loading...
Need help?
General
