Connecting your Detector to your Smartphone via Bluetooth®
1. Power on RAD 480i – Make sure the unit is connected to your car’s 12V port.
Note: the first time RAD 480i is powered on, you will be prompted to select your time zone and daylight saving
time
2. Install and run the Cobra iRadar app on your smartphone
Note: the first time you run the app, you will be prompted to register a new account
3. In the iRadar app, press the Menu button then select “Devices”
4. Select “RAD 480i” from the list
5. In the iRadar app, the RAD 480i entry will display “Connected” when it has paired. Press the “Menu” button then
“Home” to return to the Map screen.
6. You’re all set!
RAD 480i Features
To Next Page
Loading...
