English
6
Settings
Your Detector
Settings
•
Sens Mode
Setting your detector to City mode sensitivity delays all X band audio alerts at
lower signal strength levels. (A single beep will sound when the signal is rst
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates what you will
see and hear as you complete each step. The factory setting is Highway mode.
To Change From Highway Mode To City Mode
Press and release
the SEN button.
Audible Tone Visual Display
One beep
c appears in the display
SEN Button
Press and
release
City Mode
X K Ka V
c
Highway Mode
X K Ka V h
To Change From City Mode To Highway Mode
Press and release
the SEN button
again.
Audible Tone Visual Display
Two beeps
h appears in the display
To Next Page
Loading...
Need help?
General
