Cobra RAD450 User Manual

It D t ti n
Your Detector ,-
Understanding Radar and Laser
Radar Speed Monitoring Systems
Three band frequencies have been approved by the Federal Communications
Commission (FCC) for use by speed monitoring radar equipment:
X band 1 0.525 GHz
K band 24.150 GHz
Ka band 33.400 - 36.00 GHz
Your detector detects signals in all three radar bands, plus Ku band (13.435
GHz), which is an approved frequency used in parts of Europe and Asia.
VG-2
VG-2 is a "detector detector" that works by detecting low-level signals emitted
by most radar detectors. Your detector does not emit signals that can be detected
by VG-2, but does detect VG-2 signals and will alert you when a device is in use
near your vehicle. While no signal is being detected, press and hold the Dim
button for four seconds .
Your detector can be spotted by Spectre IV+ RODs, but is invisible to VG-2 and
Spectre I RODs. You can choose whether you wa111t to be alerted to VG-2 and
Spectre I & IV+ ROD signals. The factory setting for VG-2 and Spectre I & IV+
alerts is Off. It is recommended to leave these Off unless you are concerned
about being monitored for having a radar detector .
The factory setting for VG-2 alerts is Off.
0 English

Cobra RAD450 Specifications

General

Brand	Cobra
Model	RAD450
Category	Radar Detector
Language	English