EasyManua.ls Logo

Cobra SPYBALL 6808-9 - User Manual

Cobra SPYBALL 6808-9
88 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SPYBALL
®
6808-9/6828-9
MANUALE UTENTE
USER INSTRUCTIONS
NOTICE D’EMPLOI
BEDIENUNGSANLEITUNG
VEHICLE SECURITY

Table of Contents

Questions and Answers

  • K
    kimmartinAug 2, 2025
    What to do if Cobra SPYBALL 6808-9 Car Alarm does not respond to the transmitter?
    • D
      Debra HunterAug 2, 2025
      If your Cobra Car Alarm isn't responding to the transmitter, try the following: * Ensure the system hasn't entered sleep mode. * Operate the transmitter closer to the unit, as radio signal interference may be present. * Replace the transmitter battery. * Realign the transmitters.
  • R
    Rebekah SmithAug 12, 2025
    What to do if Cobra SPYBALL 6808-9 Car Alarm is disarmed but motorcycle won't start?
    • J
      Jonathan MoranAug 12, 2025
      If your Cobra Car Alarm is disarmed but the motorcycle won't start, check these: 1. Ensure the motorcycle is in neutral gear. 2. Confirm the kill switch is in the RUN position. 3. Verify the main ignition fuse is intact. 4. Ensure the motorcycle battery is charged. 5. Check if the side stand needs to be up or the clutch lever pulled in for starting, depending on the model.
  • E
    Erin SmithAug 21, 2025
    Why is Cobra Car Alarm not triggered by moving or lifting the bike?
    • D
      Dana DixonAug 21, 2025
      If your Cobra Car Alarm isn't triggering when the bike is moved or lifted, consider these points: * Has the inhibition time elapsed? * Is the movement detector activated, or has it been deselected? * If necessary, adjust the movement detector.

Summary

1. KIT COMPOSITION

2. FEATURES OF THE RADIO TRANSMITTER

2.1. Realignment of a transmitter

Procedure to re-synchronize a transmitter with the receiver when it becomes desynchronized.

2.2. Pairing of new transmitters

Steps to pair one or two new transmitters if original ones are lost or not functioning.

3. BIKER RECOGNITION FUNCTION

3.1. Selection of the Biker Recognition function

How to activate or deactivate the automatic arming/disarming function based on proximity.

4. ARMING; DISARMING OF THE SECURITY SYSTEM

4.1. Arming; disarming without Biker Recognition function (use as a conventional transmitter)

Instructions for manual arming and disarming using the transmitter as a standard remote.

4.2. Arming; disarming with Biker Recognition function

Details on how the system automatically arms and disarms when the transmitter is in/out of range.

5. PROTECTION FUNCTIONS

6. TEMPORARY DEACTIVATION OF THE MOVEMENT SENSOR

7. ADJUSTMENT OF MOVEMENT DETECTION SENSITIVITY

8. ALARM CYCLE

8.1. Reduction of audible alarm power

How to lower the siren volume temporarily for specific environments.

8.2. Check control function

Method to test system protection functions without triggering a full alarm cycle.

8.3. Alarm memory

How the system records and indicates the cause of previous alarms upon disarming.

9. PANIC FUNCTION

10. ANTI-HIJACK FUNCTION

11. BACK-UP BATTERY SUPPLY

12. SERVICE MODE

13. “TURN INDICATOR ON” AUDIBLE WARNING SIGNAL

14. SELECTABLE FUNCTIONS - ENABLING AND DISABLING PROCEDURES

15. AUTOMATIC TIMED SWITCH-OFF FUNCTION (SLEEP FUNCTION)

16. EMERGENCY DISARMING VIA PIN CODE

16.1. Reading the PIN code

Procedure to recover the original PIN code if it has been lost.

16.2. Changing the PIN code

Instructions for replacing the existing PIN code with a new one.

17. TROUBLESHOOTING GUIDE

18. TECHNICAL DATA

Cobra SPYBALL 6808-9 Specifications

General IconGeneral
TypeCar Alarm
Remote StartYes
Keyless EntryYes
Two-Way CommunicationYes
Panic ModeYes
Starter KillYes
Shock SensorYes
Remote ControlYes
LCD DisplayYes
CompatibilityUniversal

Related product manuals