Data Display Brightness
You can choose from three settings for
Brightness of the display. Repeatedly push
the Dim button to cycle through the settings.
In Dark mode the power LED will blink
slowly to indicate that power is On.
The factory setting is Bright.
VG-2 Alert Settings
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from VG-2 RDDs and can provide alerts
when any of these or similar devices are in use near your vehicle.
Your detector is invisible to VG-2 RDDs. You can choose whether you want to
be alerted to VG-2 RDD signals. The factory setting for VG-2 alert is Off.
Mute Button
City Button Dim Button
To Turn VG-2 Alerts On and Off
While no signal
is being detected,
press and hold the
Dim button for
four seconds.
Audio Visual Display
On = One Beep V/S Flashes Once
Off = Two beeps V/S Flashes Twice
Press and
release
Dim Button
Bright
Dim
Dark
Radar Alert Settings
The detector allows you to choose whether it will show alerts on the X, K and Ka
Bands. The factory settings are: X, K, and Ka Band On.
To Turn X Band On and Off
While no signal
is being detected,
press and hold
both the Dim and
Mute buttons for
four seconds.
Audio Visual Display
X On = Two beeps X/K LED Flashes Twice
X Off = One beep X/K LED Flashes Once
To Turn K Band On and Off
While no signal
is being detected,
press and hold
both the Mute and
City buttons for
four seconds.
Audio Visual Display
K On = Two beeps X/K Flashes Twice
K Off = One beep X/K Flashes Once
To Turn Ka Band On and Off
While no signal
is being detected,
press and hold
the Dim and City
buttons for
four seconds.
Audio Visual Display
Ka On = Two beeps Ka Flashes Twice
Ka Off = One beep Ka Flashes Once
SSR80_MANL.indd 8-9 4/16/12 8:20 AM
To Next Page
Loading...
Need help?
General
