Coby CHBT-706 User Manual

2
US
INTRODUCTION
Thank you for purchasing the CHBT-706! Please read this manual
fully before using this device. The terms used within will become more
familiar as you use your headphones.
CHARGING
Charge your headphones fully before your rst use. To charge, insert the
microUSB cable into the charging port, and connect to a power source.
When it is charging, the indicator light will glow red. After it has nished
charging, the indicator light will go off. Charging time takes up to 2
hours.
When the headset is running out of battery, the blue indicator light will
appear and an alarm sound will be heard. Please charge the battery
immediately. If the headphones are used after this warning, they will
automatically turn o󰀨 after 5 to 10 minutes.
BLUETOOTH
®
To connect the headphones to your audio device, first turn the
headphones on by pressing the Power Button. The headphones will
make a noise when they are turned on, and a blue indicator light will
flash when they enter Bluetooth
®
Mode. If you are not in Bluetooth®
Mode, press and hold the Mode (M) Button until the lights ash blue.
Open the Bluetooth
®
function on your audio device, and connect to
“CHBT-706.” If asked to enter a passcode, enter in "0000" or "1234."
When the headphones have connected successfully, they will make a
conrmation sound.
CONTROLS
TO: DO THIS:
Power On/O󰀨 Press the Power Button.
Answer or End a Call Press the Call Button.
Decline an Incoming Call
Hold the Call Button for 3 seconds,
then release the button.
Play or Pause a Song or Video Press the
4
/
;
Button once.
Go to the Previous Track Press the
9
Button once.
Go to the Next Track Press the
:
Button once.
Increase Volume Press and hold the
:
Button.
Decrease Volume Press and hold the
9
Button.
Change Mode Press the M Button once.

Coby CHBT-706 Specifications

General

Brand	Coby
Model	CHBT-706
Category	Headphone
Language	English