Coby CRA54 - Digital Alarm Clock - Sleep or Sleep-And-Wake to Radio; Auxiliary Audio Input from External Device

English
Operation Page 7
To cancel the snooze operation and turn the 2.
alarm timer off completely, set the FUNC-
TION switch [4] to the “OFF” position.
Sleep or Sleep-and-Wake to Radio
Turn the radio on to tune to the desired radio 1.
station and set the desired volume level.
To Sleep to Radio: Set the FUNCTION 2.
switch [4] to the “OFF” position.
To Sleep-and-Wake to Radio: Set the FUNC-
TION switch [4] to the “AUTO” position.
To activate the Sleep timer, press the SLEEP 3.
button [9]. The clock will display “0:59” to
indicate the default sleep period. The radio
will turn off automatically when the sleep
period is over (59 minutes).
To increase the sleep period: Hold the 4.
SLEEP button [9] and simultaneously press
the HOUR button [6]. The sleep timer will
increase by one hour to “1:59” (1 hour and
59 minutes).
To reduce the sleep period: Hold the
SLEEP button [9] and simultaneously press
the MINUTE button [5]. The sleep timer will
decrease by one minute.
To turn the radio off before the sleep timer is 5.
over, press the SNOOZE button [10].
Auxiliary Audio Input From
External Device
Set the AM/FM/AUX switch [12] to the “AUX” 1.
position.
Set the FUNCTION switch [4] to the “ON” 2.
position.
Use a 3.5mm male to male audio cable to 3.
connect the Headphone / Audio Out jack of
the external device to the AUX IN jack [13] of
the CRA-54/50.
Adjust the volume to a comfortable listening 4.
level and start playback on the external de-
vice. You may also use the VOLUME dial [14]
of the CRA-54/50 to adjust the volume level.