Slide the Power Switch to the "ON" position to turn on the
speaker. Once the speaker is on, it will default to Bluetooth
mode, and the RGB light will be on.
To turn off the speaker, slide the Power Switch to the "OFF"
position, and the RGB light will be off.
Powering On/Off
Bluetooth Mode
Bluetooth connection with your device
When the speaker is on, it will automatically enter Bluetooth
pairing mode (If the speaker is in other playback modes, re-
peatedly press the Mode button until the status LED indicator
quickly flashes blue to enter Bluetooth mode.). Turn on Blue-
tooth in your device’s settings and search for ‘‘CSTW52FD’’,
then tap ‘‘CSTW52FD’’ to connect.
Note:
If you can’t connect the speaker to your device, check if
the speaker is currently connected to another device. If it is,
press
and hold the button for 2 seconds to unpair the speak-
er from the current connected device.
Enter Bluetooth
pairing mode
Connected to a device
(Successfully paired
with your device).
Quickly flashing blue
(Status LED indicator)
Steady blue (Status LED indicator)
Connected tone notification
Bluetooth mode tone notification
True Wireless Stereo connection
The CSTW52FD supports True Wireless Pairing, which lets you
EN 03 EN 04
NOTES: 1.
The speaker will automatically be paired with your last
successfully connected media device the next time it is turned on.
2.
Press and hold the button for 2 seconds to unpair
or re-pair the speaker.
3. If there is no Bluetooth connection on the speaker for more
than 5 minutes, it will automatically turn o.