14
Taking the cooling device out of operation
➤ Slide the switch (fig. 2 3, page 4) to the “OFF” position.
➤ Disconnect the device from the voltage supply.
I
6.3 Connecting to vehicle power
I
7 Cleaning and maintenance
A
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
NOTE
If you are not going to use the cooling device for a long time, leave
the door slightly ajar to prevent unpleasant odors building up.
NOTE
If you connect the cooling device to the vehicle power, remember
that you may have to turn on the ignition to supply it with power.
NOTICE! Risk of damage
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
Coca-ColaF15-F25-CoolCan10_OPM_EMEA.book Seite 14 Freitag, 29. November 2019 3:56 15
To Next Page
Loading...
Need help?
General
