EasyManua.ls Logo

Coccolle Amani - Page 8

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
E: Adjust the handle up or down by pressing the buttons on both sides of the
handle.
D: The car seat is now well attached to the stroller frame.
F: Press the square buttons on the adapter to detach the car seat.
Pic.F: Now the harness has been safely buckled. Adjust the shoulder belt to a
more comfortable position. Adjust also the waist belt to a more comfortable
position.
Pic.G: Press the button in the middle of the safety buckle to open it.
The attachment of the car seat
A: Match the adapter with the slots on both sides of the car seat and insert it
until you hear a “click” sound.
B: Press the button on the car seat and meanwhile pull the adapter out to
detach it.
C: Insert the car seat on the slots on both sides of stroller frame until you hear a
“click” sound.
Pic.41: Open the snap fastener under the seat unit first.
Pic.27-29: Press the buttons on both sides of the seat unit and meanwhile move
it upward or downward to a wanted recline position.
Pic.30-33: Press the square buttons on both sides of the seat and take it out,
reverse it and match with the slots on the stroller frame, insert it until you hear a
“click” sound. Adjust it to the position you want after it’s reversed.
Pic.34-35: Zip down the zipper on the canopy for more ventilation and a close
watch of the baby inside.
Pic.36: This version IS NOT equipped with a bottle holder.
Pic.37-38: Match the zipper on the foot cover with the zipper on the seat and zip
it up to install the foot cover.
Pic.39-40: Put the collar of the foot cover over the front bumper and fasten the
snap fastener.
Folding
Pic.43: Detach the front bumper.
Pic.42: Close the canopy by pulling it backward.
Pic.44: Pull down the footrest.
Pic.45-46: Lift the footrest towards the canopy in order to fold the seat.
Pic.47-48 Open one hand fold system and lay it down until it is folded.
Pic.D-E: Insert both left and right part to the middle part of the harness.
Pic.A-B: Buckle up the left and right shoulder belt by hook.
Using the Safety Harness
Pic.C: Both shoulder belts are well buckled.
EN