Cochlear Baha 5 - Battery and Battery Door; How to Replace the Battery; Locking the Battery Door

8
Before You Begin:
Ensure your Cochlear
™
Baha
®
5
Sound Processor or hearing aid has
a new battery. You may experience
connectivity issues if battery power
is low.
1
Plug power cable into TV
Streamer, and plug into
wall outlet.
2
Turn off either ReSound Hearing
Aid or Baha 5 Sound Processor.
3
Press pairing button on
TV Streamer. Press number
of times (1, 2, or 3) for
channel allocation.
NOTE: The TV Streamer LED
will flash yellow indicating
that pairing mode has been
activated. The number of
flashes indicates the channel
selection. Pairing mode is
active for 20 seconds.
Pushes
Light Indicator
Pattern
Channel
1
1
2
2
3 3
4
Turn on ReSound Hearing
Aid. The hearing aid pairing
is successful when the yellow
flashing light on the TV Streamer
turns solid.
5
The yellow light will go back
to flashing when ready for the
Baha 5 Processor pairing.
6
Turn on Baha 5 Sound Processor
by closing the battery door.
7
The Baha 5 Sound Processor
pairing is successful when an
audible melody plays in the
sound processor.
TV Streamer Pairing
or
or