24
V
W
U
y
x
w
v
u
Baha Cordelle II
Note: Baha Cordelle II not shown in actual size.
u
Connector cable: Connect the straight plug to the head-worn unit and the
angled plug to the body-worn unit.
v
Volume control and On/Off button: Move the wheel to turn your sound
processor on or off and to increase or decrease the volume.
w
Tone switch: The tone switch controls the frequency response of the sound
processor. It can be set in three different positions:
N=Normal. Amplifies all frequencies equally.
H=High frequency emphasis. Reduces low frequency sounds which may
improve speech understanding, especially in background noise.
L= Low frequency emphasis. May be especially useful during the first period
after fitting as it allows you to gradually get used to high frequency sounds
you have not heard for a long time.
x
Built-in telecoil
y
Direct Audio Input for connecting audio accessories
U
Programme switch: M= Microphone, MT=Microphone and Telecoil,
T=Telecoil
V
Flip-up battery cover: When changing the battery, remember to use 9V
batteries only. Make sure the plus-mark on the battery is facing the plus-
mark on your body worn unit. Don’t force the door shut, as it could break.
Note: Never adjust the potentiometers
W
yourself. This adjustment should
always be performed by your Hearing Care Professional.
Consult the Baha Cordelle II User Manual for more detailed information.
Your quick guide to
To Next Page
Loading...
