8 CR310 Remote Control User Guide
Pair
Pairing allows two devices to communicate with each other.
Your clinician may have already paired your remote control
with your processor. If not, you will need to pair it the first
time you use it.
If your remote control is not
paired to any processor, it
displays dashes (shown left)
and “blinks” when you press
buttons.
Pair your Kanso 2 Sound Processor and remote
control
1. Turn off your processor
and remote control.
2. Turn on your processor
and remote control.
They must both be
‘awake’ and on at all
times while pairing.
To Next Page
Loading...
