However, this will also limit the number of dives retained in memory for later recall. For
optimum re-creation of dives, sampling periods of greater than four seconds are not
recommended. For each one-second increase in the sampling rate, the
COMMANDER+ will store an additional six hours of profiles. As shipped from the
factory, Profile Storage Period is set to four seconds which allows for 24 hours of
storage before the earlier profiles are overwritten.
CAUTION: If the computer is not uploaded to a PC via the Analyst
®
before this period
expires, some dive profiles will be irretrievably lost.
SPECIFICATIONS:
Algorithm Modified Haldanian
Tissue Compartments 12
Computation Period Every second
Activation Manual and Water
Depth Display 99.9 metres, 0.1 metre increments
Depth Accuracy +/- 1% of full scale
Maximum Altitude 4.5 km, seamless
Altitude Accuracy +/- 300 metres
Temperature Display 0 to 37 degrees C., 1 degree increments
Temperature Accuracy +/- 2% of full scale
Surface Time 0 to 9:59 hrs/mins, 1-minute increments
Bottom Time 0 to 9:59 hrs/mins, 1-minute increments
Time To Fly 0 to 36 hours, 1-hour increments
No-Deco Time 0 to 9:59 hrs/mins, 1-minute increments
Decompression Time 0 to 9:59 hrs/mins, 1-minute increments
Decompression Ceiling 0 to 27 metres, 3 metre increments
Dive Summary Storage 100 Dives
43
To Next Page
Loading...
