To Next PageTo Next Page
Need help?Do you have a question about the Cochran EMC-20H and is the answer not in the manual?
No-Decompression time remaining at current depth.
Shows the diver's current depth in feet or meters.
Tracks the deepest depth reached during the current dive.
Records the duration of the dive at current depth.
Displays the water temperature in degrees Fahrenheit or Celsius.
Ascent rate alarm adjusts based on diver's current depth.
Ascent rate alarm remains constant regardless of depth.
Depth the diver must not ascend above during decompression stops.
Displays required decompression time at current stop or total stop time.
Total time spent at depth during the current dive.
Shows the diver's current depth in feet or meters.
Accesses clock and alarm settings, including time and alarm activation.
View pre-dive dive planning information, including NDC time and depth.
Displays unit information like air mode, battery voltage, and software version.
Sets a maximum depth limit to trigger an audible and visual alarm.
Allows inputting added conservatism into the nitrogen algorithm.
Sets the dwell time for the TACLITE™™ backlight activation.
Accesses dive statistics and historical data for recent dives.
Internal clock used to time-stamp individual dives.
Selects whether data is computed and displayed in Metric or Imperial.
Determines if bar graph shows speed or percentage of max ascent rate.
Option for fixed ascent rate warning or depth-based warning.
Sets a specific ascent rate limit for the alarm to sound.
Determines the responsiveness or sensitivity of the Ascent Rate Bar Graph.
Sets the responsiveness for the Remaining Time information display.
Allows selection of a maximum depth before an alarm is sounded.
Choose display format for decompression time (Total, Stop, or Both).
Considers recent dive history for nitrogen loading compensation.
Compensates decompression algorithm based on ambient water temperature.
Treats altitudes under 2000 feet as sea level for algorithm adjustment.
Sets the duration for viewing the alternate screen after access.
Sets the duration, in seconds, for TACLITE™™ backlight activation.
Enables or disables the audible alarms and beeper.
Configures ceiling display format in Decompression Mode.
Allows inputting added conservatism into the nitrogen algorithm.
Enables or disables the Training Mode for dive data recording.
Sets post-dive interval duration when Training Mode is enabled.
Adjusts algorithms based on water temperature (Normal/Reduced modes).
Explains how microbubbles affect bubble formation and algorithm adjustment.
Allows users to input extra conservatism into the nitrogen algorithm.
Uses recent dive history to compensate nitrogen loading.
Compensates depth readings for differences between salt and fresh water.
Adjusts decompression algorithm for changes in altitude.
General| Type | Dive Computer |
|---|---|
| Display | LCD |
| Nitrox | Yes |
| Modes | Gauge |
| Max Depth | 330 ft (100 m) |
| Water Resistance | 330 ft (100 m) |
