More than one time Control
You can set max 12 times for the indicated receivers in a day. For example:
The memory set totally has 12 sets .
1. If you have 3 receivers, and you set up 2 times "ON/OFF" on 1 receiver. The memory sets has rest 10 sets. You can set up
10 times in other indicated receivers.
2. If you have 4 receivers. You can set up 1 time "ON/OFF" in indicated receiver A. Set up 2 times "ON/OFF" on indicated
receiver B. Then you will rest 9 sets available to set up.
Pause Function of Timer
Delete Function of Timer
!
!
!
!
!
!
!
Press " " button 3 seconds, use" " button to select the set number that you need on display.
Press" " button and press " " the pause function start.
Backing to the main menu, the selected set will be blocked.
Press" " button again and press " " button, return to the timer function.
Press " " button 3 seconds, use " " button to select the set number that you need on display.
Press " " button for 3 seconds, the setting time and unit on display will blink.
Press " " button, the setting has deleted.
TIMER
ENTER
ENTER
TIMER
\ DEL.
ENTER
Note:
Do not expose this product to excessive heat, direct sunlight or moisture.
Do not drop this product from the upside
If the Remote Control Timer is not used for a period f time, the battery may become flat.
!
!
!
Replace fresh 3V CR2032 Lithium
1.Please check the LCD battery power
2.After replace the fresh battery, the displace doesn't show, please
send it back to the agent.
1.Please check the LCD battery power
2.After replace the fresh battery, the displace doesn't show, please
send it back to the agent.
Please check 12 V battery.
Please check the battery power and replace fresh battery.
Digits not clear
No display
Short distance
No indicator
signal
Low power
Troubleshooting
To Previous Page
Loading...
Need help?
General
