Getting Started Guide
After Sales Support 1300 663 907
www.winplus.com.au
1. UNPACK
Unpack your Cocoon DJ Speaker with Party Lights and check that you have all the components:
1 x Cocoon DJ Speaker with Party Lights
1 x Remote Control
1 x Wireless Microphone
1 x 3.5mm Aux Cable
1 x Power Cable
2 x Activ Energy AA Batteries
2 x Activ Energy AAA Batteries
1 x Warranty Certicate
1 x Instruction Manual
1 x Getting Started Guide
2. INSERT MICROPHONE BATTERIES
Remove the battery cover from the rear of your Wireless Microphone, then insert the
included 2x Activ Energy AA Batteries, taking note of correct polarity. Secure the battery
cover back in place.
HE160821
02/2016
3. INSERT REMOTE BATTERIES
Remove the battery cover from the rear of your Remote Control, then insert the included
2x Activ Energy AAA Batteries, taking note of correct polarity. Secure the battery cover
back in place.
4. CONNECT POWER CABLE
Connect the AC Power Cable to the rear of the unit, plug into a mains power point and
then switch the power point on.
To Next Page
Need help?
General
