To Next Page
M
Matthew WilsonJul 30, 2025
What to do if Cocraft Trimmer won’t start?
- MmaldonadomichaelJul 30, 2025
If the Cocraft Trimmer won’t start, first ensure the correct fuel is used; if needed, empty and replace the fuel. Inspect the spark plug and replace if necessary. Also, ensure the choke is in the correct position. For a cold start, begin with full choke, then reduce to no choke (or half choke) once the engine starts. For a warm start, use no choke. If the engine is flooded, disconnect the spark plug lead, remove the spark plug, turn the engine over to evaporate fuel, wipe the spark plug dry, and refit (or replace).
General
