Need help?Do you have a question about the Coda Music STOMP and is the answer not in the manual?
General| Type | Multi-Effects Pedal |
|---|---|
| Presets | 128 User Presets |
| Inputs | 1 x 1/4" instrument input |
| Outputs | 1 x 1/4" Headphone Output |
| USB | Yes, for firmware updates and preset management |
| Power Supply | 9V DC power supply (included) |
| Effects | Over 100 effects including distortion, delay, reverb, modulation |
Instructions for installing a 9-volt battery into the STOMP pedal.
Procedure for turning the STOMP pedal on and off, including LED status.
Steps to pair the STOMP pedal with a host device via Bluetooth.
Configures STOMP to send Left/Right arrow commands.
Configures STOMP to send Up/Down arrow commands.
Configures STOMP to send Page Up/Down commands.
Configures STOMP to send Space/Enter commands.
Enables continuous command sending when holding a footswitch.
Information on battery duration, sleep mode, and low battery indication.
How to activate the virtual keyboard function for text input.
Details on using the USB port for charging external devices.
Explains the meaning of different LED color and flashing patterns.
Indicates connected device and power above 25%.
Indicates device is not paired and waiting for selection.
Indicates virtual keyboard state; reactivate by pressing both switches.
Indicates low battery or adapter needed.
Steps to resolve issues when the STOMP pedal fails to pair.
Solutions for when pairing is successful but the app doesn't respond.
To Next Page