Coda Audio AiRAY Rigging Maintenance V1.0 2
Overview:
The correct usage of your Coda Audio system must be adhered to at all times. If you are
unsure of any point, it is always best to ask before you start using the system; this will not
only assist in a better understanding of your equipment, but also further your general
knowledge of Coda Audio systems.
This document is not a training manual. For any and all training related information, you must
contact your local Coda Audio supplier or Coda Audio Hannover Germany for further
information.
It is Coda Audio’s requirement that all systems will only be used by suitably experienced and
qualified individuals. This includes both the use of the system and its general maintenance.
Any and all test certificates that may be required for your territory must be obtained in
accordance with local rules and regulations; this is the responsibility of the equipment owner,
not Coda Audio or its local sales representatives.
Cabinets:
All Coda Audio line array cabinets are designed to be used in both ground stack and
suspended formats (using the appropriate accessories designed for these functions).
Your Coda Audio speaker cabinet (where applicable) has integrated steel flying hardware
which has been designed and fitted to the cabinet by Coda Audio during the manufacturing
process. All such flying hardware has been designed to perform its function in line with the
overall system design and specifications for use.
Example of integrated flying hardware
(Picture #1 AiRAY 3D view)
To Next Page
Loading...