P.32
Output Power
1 kHz, THD ≤ 1%, in dual channel operation
typical values @ 230 V
1250 W @ 16
duration limited by fuse / thermal protection for RL<=8 Ù
2300 W @ 8 Ù
5100 W @ 2 Ù
Peak Output Power 1250 W @ 16 Ù Peak
1 kHz, single sine wave in dual channel operation
typical values, may be subjected to component tolerances
2500 W @ 8 Ù Peak
4900 W @ 4 Ù Peak
5300 W @ 2 Ù Peak
Circuitry Hybrid Class H
Signal to Noise-Ratio
>107 dB (unweighted)
22 Hz – 20 kHz, 4 Ùload
>110 dB (A-weighted)
Power consumption @ 230 V
* both channels driven at 550 W output power (approx. of max. THD limited output power
Amplifier standby (power off): 8 W
with pink noise to represent typical music signal)
Idle (Amp powered on): 60 W
*
4 Ù: 1900 W
*
2 Ù: 2100 W
Maximum output voltage
± 200 V peak
in dual channel operation; typical values, may be subjected to component tolerances
Maximum output current
± 72 A peak
in dual channel operation; typical values, may be subjected to component tolerances
5 SPECIFICATION
USER MANUAL v1.0
CODA AUDIO LINUS10
/ 50 Hz
Ù
4000 W @ 4 Ù
CODA AUDIO
LINUS 10
To Next Page
Loading...
